Posts for tag: dental implants

By Daniel Mashni, DDS & Associates, PLLC
March 28, 2019
Category: Dental Procedures
Tags: dental implants  
CouldYourMetalAllergyKeepYouFromObtainingDentalImplants

Dental implants are today’s closest restorative facsimile to natural teeth. And they’re versatile: not only can they replace single teeth but they can also support bridges or dentures.

But since one of their crucial components is made of metal, are you out of luck obtaining this state-of-the-art dental restoration if you have a metal allergy?

The answer is: probably not—it’s rare for implants to cause an allergic reaction. Still, metal allergies can be a potential problem within your mouth as with other areas of health.

An allergy originates from the body’s necessary response to potentially harmful microorganisms or substances. Sometimes, however, this response becomes chronic and exaggerated, creating an allergy. People can have allergies to nearly anything with responses ranging from a minor rash to a potentially life-threatening multi-organ system shutdown (anaphylactic shock).

A small number of people have allergies to particular metals. One of the most common is nickel, which affects an estimated 17% of women and 3% of men; cobalt and chromium are also known to cause allergies. Consumer exposure, particularly metal contact with the skin through jewelry or clothing, is the most prevalent, but not the most concerning. That’s reserved for metal allergies related to medical devices like coronary stents or hip and knee prostheses. And in dentistry, there are rare occasions of inflammation or rashes from metal amalgam fillings.

Which brings us to dental implants: the main metal post that’s inserted into the jawbone is usually made of titanium. It’s the metal of choice for two reasons: it’s bio-compatible, meaning the body normally accepts its presence; and it’s osteophilic, which means bone cells readily grow and adhere to it, a major reason for implant durability.

While it’s possible for someone to have an allergy and subsequent reaction to implants with titanium, the occurrences appear to be extremely low. In one study of 1,500 patients, titanium allergies were estimated to be a factor in implant failures in less than 1% of those studied.

Even so, if you have known metal allergies you should make sure your dentist knows. Being aware of all the facts will help them recommend the best tooth replacement choice for you—and hopefully it will be dental implants.

If you would like more information on dental implant restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor article “Metal Allergies to Dental Implants.”

By Daniel Mashni, DDS & Associates, PLLC
November 28, 2018
Category: Dental Procedures
Tags: dental implants  
ScreworCementWhichisBestforAttachingYourImplantCrown

If you’re in the initial planning stages for a dental implant, you may already be encountering a number of options to consider. One that may come up is how the visible crown will attach to the metal implant imbedded in the bone.

Generally speaking, implants are composed of two parts: a metal post most often made of titanium placed into the bone that serves as the “root” for the new tooth; and a visible, life-like crown made of dental porcelain that attaches to an abutment on the titanium post. The crown can be attached in one of two ways: either with a small screw through the biting surface of the crown into a receiving hole in the abutment or cemented to it.

The major advantage of a screwed crown is that it allows for easy removal of the crown if needed. While the titanium post can often last a lifetime, porcelain crowns more often need repair or replacement since they receive the brunt of the biting forces in the mouth. A screw-attached crown is much easier to remove than a cemented one.

On the other hand, screwed crowns have a small access hole that must be restored with a tooth-colored filling to help the crown appear natural. This isn’t too great an issue with back teeth but does make achieving a natural appearance in the front more difficult. Cemented crowns look more like a natural tooth and are thus more flexible in achieving the desired appearance.

Besides the possibility the cement may cause gum inflammation or bone loss, the chief detraction from cemented crowns is the difficulty in removing them. Crowns are often damaged in this process so it’s highly likely it will have to be replaced rather than repaired. It’s possible to use weaker cement, but this raises the risk of the crown coming loose at some point from the abutment.

As we plan for your implant, we’ll discuss which type of attachment will work best for you, depending on the tooth to be replaced and other conditions with your oral health. The end result, though, should be the same — a new, natural-looking tooth that serves you well for many years to come.

If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “How Crowns Attach to Implants.”

By Daniel Mashni, DDS & Associates, PLLC
September 29, 2018
Category: Dental Procedures
NewFrontTeethforaTeenagedDavidDuchovny

In real life he was a hard-charging basketball player through high school and college. In TV and the movies, he has gone head-to-head with serial killers, assorted bad guys… even mysterious paranormal forces. So would you believe that David Duchovny, who played Agent Fox Mulder in The X-Files and starred in countless other large and small-screen productions, lost his front teeth… in an elevator accident?

“I was running for the elevator at my high school when the door shut on my arm,” he explained. “The next thing I knew, I was waking up in the hospital. I had fainted, fallen on my face, and knocked out my two front teeth.” Looking at Duchovny now, you’d never know his front teeth weren’t natural. But that’s not “movie magic” — it’s the art and science of modern dentistry.

How do dentists go about replacing lost teeth with natural-looking prosthetics? Today, there are two widely used tooth replacement procedures: dental implants and bridgework. When a natural tooth can’t be saved — due to advanced decay, periodontal disease, or an accident like Duchovny’s — these methods offer good looking, fully functional replacements. So what’s the difference between the two? Essentially, it’s a matter of how the replacement teeth are supported.

With state-of-the-art dental implants, support for the replacement tooth (or teeth) comes from small titanium inserts, which are implanted directly into the bone of the jaw. In time these become fused with the bone itself, providing a solid anchorage. What’s more, they actually help prevent the bone loss that naturally occurs after tooth loss. The crowns — lifelike replacements for the visible part of the tooth — are securely attached to the implants via special connectors called abutments.

In traditional bridgework, the existing natural teeth on either side of a gap are used to support the replacement crowns that “bridge” the gap. Here’s how it works: A one-piece unit is custom-fabricated, consisting of prosthetic crowns to replace missing teeth, plus caps to cover the adjacent (abutment) teeth on each side. Those abutment teeth must be shaped so the caps can fit over them; this is done by carefully removing some of the outer tooth material. Then the whole bridge unit is securely cemented in place.

While both systems have been used successfully for decades, bridgework is now being gradually supplanted by implants. That’s because dental implants don’t have any negative impact on nearby healthy teeth, while bridgework requires that abutment teeth be shaped for crowns, and puts additional stresses on them. Dental implants also generally last far longer than bridges — the rest of your life, if given proper care. However, they are initially more expensive (though they may prove more economical in the long run), and not everyone is a candidate for the minor surgery they require.

Which method is best for you? Don’t try using paranormal powers to find out: Come in and talk to us. If you would like more information about tooth replacement, please contact us or schedule an appointment for a consultation. You can learn more in the Dear Doctor magazine articles “Crowns & Bridgework,” and “Dental Implants.”

By Daniel Mashni, DDS & Associates, PLLC
August 30, 2018
Category: Dental Procedures
Tags: dental implants  
ImmediateImplantsHelpyouAvoidDisruptionsinYourAppearance

Dental implants are widely recognized as the best tooth replacement option available. For most people, though, it’s a long process: after a tooth is extracted the socket is allowed to heal and fill in with new bone before implant surgery: that can take anywhere from two to five months. Afterward, there’s usually a two– to three–month period after the implant is placed before the permanent crown (the visible tooth) can be attached.

Without adequate bone present the implant’s long-term stability might be compromised. Furthermore, the implant’s durability is dependent upon bone growth around and attaching to its titanium post after surgery in a process known as osseo-integration. These two considerations indeed serve a critical function in the implant’s ultimate success.

In recent years, however, a variation to this traditional implant process has emerged that allows for immediate implantation right after extraction. Besides combining extraction and implantation into one surgical procedure, immediate implants minimize the disruption to a person’s appearance (especially with visibly prominent front teeth) when combined with a provisional crown.

Immediate implants joined together that replace a full arch of teeth can receive biting forces and succeed. Individual implants that replace single teeth, however, won’t work in all situations and must be undertaken with care to ensure long-term success. Because there may be less available bone, the implant must fit snugly within the socket to maintain as secure a hold as possible. The surgeon must also take care not to damage too much of the gum and bone tissue when extracting the tooth, which could affect both the integrity of the implant and its appearance in the gum line.

Temporary crowns may be attached during the implant surgery, but they’re installed for appearance’ sake only. For individual crowns, they must be designed not to make contact with the teeth on the opposing jaw to avoid generating biting forces that will cause the implant to fail and stop the bone-healing process that occurs with osseo–integration.

If you’re considering dental implants, it’s important to discuss with us which type of procedure, traditional or immediate, would be best for you, and only after a comprehensive examination of your mouth and jaw structure. Regardless of the approach, our goal is to provide you with a smile-transforming restoration that will last for many years to come.

If you would like more information on the dental implant process, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Immediate Implants.”

By Daniel Mashni, DDS & Associates, PLLC
July 21, 2018
Category: Dental Procedures
Tags: dental implants  
MoreThananewSmile-DentalImplantsHelpStopBoneLossasWell

Since their introduction over three decades ago, dental implants have evolved into dentistry’s premier tooth replacement choice. While their primary purpose is to replace missing teeth and rejuvenate a patient’s smile, they’re also regarded for another important benefit: they can slow or stop bone loss accelerated by the loss of teeth.

Like all living tissue, bone has a life cycle. Older bone dissolves and is absorbed by the body, a process called resorption. New bone forms and grows to replace the resorbed bone in response to stimuli occurring within the body. In the jaw, this stimulation comes from the forces the teeth receive when we bite or chew.

When a tooth is lost, however, it no longer transmits these force stimuli to the adjacent bone. This results over time in less new growth to replace resorbed bone, and the overall bone mass shrinks. In fact, about a quarter of the normal bone width will diminish in the first year alone after tooth loss. Other serious problems follow, like gum recession or chewing and speaking difficulties. A person’s appearance may also suffer, because as resorption continues unchecked, the underlying foundational bone will continue to shrink. As more teeth are lost, a decrease in the distance between the nose and chin may result causing the lower third of the face to become smaller in size.

Dental implants can interrupt this process by encouraging bone growth around the implant. Implants are made of “osseophilic” titanium, meaning the metal has a natural affinity with bone. After implantation, bone cells will begin to grow and attach to the titanium post. The enhanced growth stabilizes bone loss by providing stimulation to the bone as teeth once did, thereby maintaining bone levels and minimizing potential effects on the patient’s appearance.

Ironically, too much bone loss could make the installation of implants more difficult, since they require a minimum level of bone mass for anchorage. Receiving an implant as soon as is practical once a tooth is lost will minimize the chances of that occurring — and a better chance of improving bone health overall.

If you would like more information on how dental implants improve bone health, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “The Hidden Consequences of Losing Teeth.”